|
| |
TM 9-2320-364-20-5
21-129
b.
Disassembly.
Use care when removing snap
and retaining rings. Snap and
retaining rings are under spring
tension and can act as projectiles
when released and could cause
severe eye injury.
(1)
With the aid of an assistant, remove retaining
ring (1), pivot pin (2), spacer (3) and slider
pivot (4) from slider (5).
NOTE
Note position of torsion spring
prior to removal.
(2)
Remove locknut (6) from screw (7). Discard
locknut.
Use care when removing springs.
Springs are under tension and can
act as projectiles when released
and could cause injury to
personnel.
(3)
Push in on end of torsion spring (8) and
remove screw (7) from slider pivot (4).
(4)
Remove locknut (9), screw (10), torsion
spring (8) and pivot lock arm (11) from
slider pivot (4). Release torsion spring and
discard locknut.
(5)
Remove two cotter pins (12), washers (13),
pivot lock slot pin (14) and pivot lock pin
(15) from pivot lock arm (11). Discard cotter
pins.
5
1
2
3
4
10
9
13
8
11
14
15
12
6
7
11
13
4
12
|
