|
| |
TM 9-2320-364-20-5
21-158
21-33. CONTAINER HANDLING UNIT (CHU) LONG STRUT BRACKET ASSEMBLY
REPAIR.
This task covers:
a. Removal
d. Assembly
f. Adjustment
b. Disassembly
e. Installation
g. Follow-On Maintenance
c. Cleaning/Inspection
INITIAL SETUP
Materials/Parts
Antiseize Compound (Item 21, Appendix C)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Slider arm in container mode,
(TM 9-2320-364-10)
Hardlift strut removed, (Para 15-6)
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Compressor Unit, Air (Item 11, Appendix G)
Gloves, Chemical Oil Protective
(Item 28, Appendix G)
Goggles, Industrial (Item 30, Appendix G)
Gun, Air Blow (Item 31, Appendix G)
Pliers, Retaining Ring (Item 49, Appendix G)
Puller Kit, Universal (Item 51, Appendix G)
Personnel Required
Two
Materials/Parts - Continued
Sealing Compound (Item 82, Appendix C)
Locknut (4) (Item 92, Appendix F)
Locknut (4) (Item 93, Appendix F)
a.
Removal.
NOTE
There are two long strut bracket
assemblies. Both are removed the
same way. Right side is shown.
(1)
Remove quick release pin (1) and pin (2)
from short strut (3) and long strut (4).
(2)
Position flip lock (5) up to hold arm
assembly (6) out.
1
2
3
6
5
4
|
