|
| |
TM 9-2320-364-20-5
21-169
(5)
Remove four screws (8) and locknuts (9)
from stow weldment (1) and front support
assembly (10). Discard locknuts.
(6)
With the aid of an assistant, remove stow
weldment (1) from front support assembly
(10).
(7)
Position stow weldment (1) on clean work
surface and remove lifting device.
b.
Disassembly.
(1)
Remove four snap pins (1), pins (2) and two
rail transport struts (3) from stow weldment
(4).
NOTE
Perform Step (2) if wire ropes are
damaged.
(2)
Remove four swaging sleeves (5) from two
wire ropes (6),
(3)
Remove eight screws (7), locknuts (8) and
lifting frame stow hooks (9) from stow
weldment (4). Discard locknuts.
NOTE
Perform Step (4) if tether pin is
damaged.
(4)
Remove four swaging sleeves (10) and two
wire ropes (11) from tether pins (12) and
quick release pins (13) from bottom of stow
weldment (4).
4
5
6
1
2
3
7
8
9
12
5
5
6
5
1
1
8
9
10
10
11
13
2
10
|
