|
| |
TM 9-2320-364-20-5
21-197
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(8)
Apply antiseize on pin (15).
(9)
Align pin hole in pin (15) with pin hole in
lower part of flipper bracket (17) and install
pin in flipper bracket and boss (19).
(10)
Apply antiseize on pin (12).
(11)
Align pin hole in pin (12) with pin hole in
upper part of flipper bracket (17) and install
pin into flipper bracket and boss (18).
(12)
Install two spring pins (16) into flipper
bracket (17), pin (12) and pin (15).
(13)
Position washer (14) and screw (13) in end
of pin (15). Do not tighten screw.
(14)
Position washer (11) and screw (10) in end
of pin (12). Do not tighten screw.
10
11
14
12
16
17
15
13
17
16
18
19
|
