|
| |
TM 9-2320-364-20-5
21-207
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(4)
Apply sealing compound to threads of screw
(4).
(5)
Position bumper weldment (2) on front
support assembly (3) and install two
washers (5) and screw (4).
(6)
Tighten screw (4) until bottom washer is
tight against front support assembly (3).
(7)
Loosen screw (4) 1/4 turn or until bumper
weldment (2) moves freely.
(8)
Install snapper pin (1) and bumper weldment
(2) to front support assembly (3).
2
3
1
5
4
2
3
|
