|
| |
TM 9-2320-364-20-5
22-7
(4)
Remove four nuts (10), lockwashers (11),
screws (12), washers (13) and machine gun
ring front support channel (14) from left and
right front supports (15) and (16). Discard
lockwashers.
b.
Installation.
(1)
Install machine gun ring front support
channel (14), four washers (13), screws (12),
lockwashers (11) and nuts (10) on left and
right front supports (15) and (16).
Machine gun ring front support
weighs 55 lbs (25 kg). Attach
suitable lifting device to prevent
injury to personnel.
(2)
With the aid of an assistant, position two
spacers (8), machine gun ring front
support (1), four washers (7), screws (6)
and locknuts (5) on skid plate (9).
(3)
Position four washers (4), screws (3) and
locknuts (2) on machine gun ring front
support (1).
(4)
Tighten four locknuts (5) on screws (6).
(5)
Tighten four locknuts (2) on screws (3).
c.
Follow-On Maintenance:
Install machine gun ring, (Para 22-2).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
