|
| |
TM 9-2320-364-20-5
24-3
(6)
Remove hole plug (7) from back of ECB (8).
(7)
Install grommet (9) on wire harness (10).
(8)
Install wire harness (10) and grommet (9) in
back of ECB (8).
(9)
Connect wire harness MC58 connector (5)
inside of ECB (8).
NOTE
Keep cushion clip and mounting
hardware to secure wire harness
to gas particulate filter bracket,
when installed.
(10)
With the aid of an assistant, remove
screw (11) and locknut (12) from dome
light bracket (13).
(11)
With the aid of an assistant, install two
ground wires 1435 (14) on dome light
bracket (13) with screw (11) and
locknut (12).
(12)
With the aid of an assistant, remove
screw (15) and locknut (16) from dome
light bracket (13).
(13)
With the aid of an assistant, install ground
wire 1435 (17) on dome light bracket (13)
with screw (15) and locknut (16).
|
