|
| |
TM 9-2320-364-34-2
3-48
Materials/Parts - Continued
Gasket (Item 67, Appendix E)
Gasket (Item 105, Appendix E)
Locknut (Item 176, Appendix E)
Lockwasher (2) (Item 237, Appendix E)
Lockwasher (24) (Item 253, Appendix E)
Lockwasher (4) (Item 255, Appendix E)
Lockwasher (8) (Item 260, Appendix E)
Lockwasher (Item 285, Appendix E)
Lockwasher (16) (Item 288, Appendix E)
Screw (2) (Item 516, Appendix E)
Materials/Parts
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Tags, Identification (Item 72, Appendix B)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine/transmission assembly removed,
(Para 3-4)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Cap and Plug Set (Item 26, Appendix F)
Pan, Drain 6 gal (Item 145, Appendix F)
Wrench Set, Socket 3/4 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 276, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device, Minimum Capacity 3000 lbs
(1362 kg)
3-5. ENGINE/TRANSMISSION SEPARATION.
NOTE
Tag and mark hoses prior to removal.
Cap and plug hoses after removal.
(1)
Remove hose 2628 (1) from elbow (2).
(2)
Remove hose 2114 (3) from elbow (4).
(3)
Remove hose 2630 (5) from elbow (6).
|
