|
| |
TM 9-2320-364-34-2
12-16
12-3. DRAG LINK REPAIR (CONT).
b.
Disassembly.
NOTE
Both ends of the drag link
are removed the same way.
Tag and mark location and
position of vertical sockets
prior to removal.
Note position of clamps
prior to disassembly.
(1)
Install drag link (3) in soft-jawed vise.
NOTE
Do not perform Steps (2) and (3)
if vertical socket assembly is lube
for life.
(2)
Remove boot (9) from vertical socket
assembly (10).
(3)
Remove lube fitting (11) from vertical
socket assembly (10).
NOTE
Do not remove clamp.
(4)
Hold screw (12) and loosen nut (13) on
clamp (14).
(5)
Remove vertical socket assembly (10) from
drag link (3).
(6)
Repeat Steps (1) through (5) for remaining
vertical socket assembly (10).
|
