|
| |
TM 9-2320-364-34-2
12-18
12-3. DRAG LINK REPAIR (CONT).
e.
Installation.
(1)
Install drag link (3) on pitman arm (8) with
screw (7), lockwasher (6) and nut (5).
Tighten nut 70 lb-ft (95 N.m).
NOTE
It may be necessary to remove
CTIS air lines to tighten castle
nut.
(2)
Install drag link (3) on steering arm (4) with
castle nut (2).
(3)
Tap on steering arm (4) and retighten castle
nut (2) on drag link (3). Tighten nut to 165
to 180 lb-ft (224 to 244 N.m).
NOTE
It may be necessary to rotate
castle nut slightly to install
cotter pin.
(4)
Install cotter pin (1) in castle nut (2).
f.
Follow-On Maintenance:
Lubricate drag link, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
