|
| |
TM 9-2320-364-34-2
12-30
12-5. 90 DEGREE GEARBOX REPAIR (CONT).
c.
Assembly.
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
NOTE
Align all matchmarks made
during disassembly.
(1)
Pack two cone bearings (29) with grease.
(2)
Install key (31), bevel gear (30) and two
cone bearings (29) on output shaft (26).
(3)
Install bearing cup (28) and oil seal (27) in
open end cap (23).
(4)
Install open end cap (23) on output
shaft (26).
(5)
Apply lubricating oil to preformed
packing (25).
(6)
Install preformed packing (25), gasket (24),
output shaft (26) and open end cap (23) in
housing (1) with four screws (22).
|
