|
| |
TM 9-2320-364-34-2
12-32
12-5. 90 DEGREE GEARBOX REPAIR (CONT).
(17)
Apply lubricating oil to preformed
packing (13).
(18)
Install preformed packing (13) on pinion
housing (10).
NOTE
Ensure gear teeth mesh as
components are assembled.
(19)
Install gasket (12) and pinion housing (10)
on housing (1) with four screws (11).
NOTE
When making adjustments,
install and remove screws in
pinion housing as necessary to
obtain a proper adjustment.
(20)
Add and/or remove gaskets (12) from
pinion housing (10) until pinion shaft (14)
rotates freely.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(21)
Remove four screws (22) from open end
cap (23) and apply sealing compound to
threads.
(22)
Install four screws (22) in open end cap (23).
(23)
Remove four screws (6) from closed end
cap (5) and apply sealing compound to
threads.
(24)
Install four screws (6) in closed end cap (5).
(25)
Remove four screws (11), pinion
housing (10) and gasket (12) from
housing (1).
|
