|
| |
TM 9-2320-364-34-2
12-37
(7)
Install two screws (7), center bearing
bracket (8) and locknuts (6) on bracket (9).
(8)
Position key (4) in gear reducer (5).
NOTE
Align key on gear reducer with
slot in steering shaft yoke.
(9)
Position steering shaft (3) on gear
reducer (5).
(10)
Install screw (2) and locknut (1) in steering
shaft (3).
c.
Follow-On Maintenance:
Install Axle No. 5 steering shaft, (TM 9-2320-364-20).
Lubricate steering shafts, (TM 9-2320-364-20).
Fill gear reducer as required, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
