|
| |
TM 9-2320-364-34-2
12-73
Materials/Parts
Cable Ties (Item 9, Appendix B)
Compound, Antiseize (Item 14, Appendix B)
Oil, Hydraulic (Item 34, Appendix B)
Sealing Compound (Item 53, Appendix B)
Tags, Identification (Item 72, Appendix B)
Locknut (5) (Item 166, Appendix E)
Lockwasher (Item 249, Appendix E)
Lockwasher (8) (Item 287, Appendix E)
Packing, Preformed (3) (Item 337, Appendix E)
Retainer (Item 470, Appendix E)
Ring, Locking (Item 479, Appendix E)
Screw (8) (Item 520, Appendix E)
Spacer (Item 650, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Cap and Plug Set (Item 26, Appendix F)
Pan, Drain 4 gal (Item 144, Appendix F)
Puller Kit, Universal (Item 174, Appendix F)
Socket, Socket Head Screw, 3/4 in.
(Item 208, Appendix F)
Vise, Pipe, Chain (Item 246, Appendix F)
Wrench, Combination 1-1/16 in.
(Item 254, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Steel Disc (Appendix C)
Wooden Block (Appendix C)
Lifting Device, Minimum Capacity 170 lbs (77 kg)
12-11. REAR STEERING GEAR AND PITMAN ARM REPLACEMENT.
(1)
Remove screw (1), locknut (2) and end yoke (3) from rear steering gear (4). Discard locknut.
(2)
Remove nut (5), lockwasher (6) and screw (7) from pitman arm (8). Discard lockwasher.
(3)
Remove rear drag link (9) from pitman arm (8).
|
