|
| |
TM 9-2320-364-34-2
12-74
12-11. REAR STEERING GEAR AND PITMAN ARM REPLACEMENT (CONT).
NOTE
Tag and mark all hoses and
tubes prior to removal.
Remove cable ties as
required.
Cap hoses and elbows after
removal.
Position drain pan under
steering gear.
(4)
Remove hose 2275 (10) and hose 2276 (11)
and two preformed packings (12) from
elbows (13) and (14). Discard preformed
packings.
(5)
Remove clip (15) and pin (16) from hard lift
point (17).
Steering gear weighs 165 lbs
(75 kg). Attach lifting device
prior to removal to prevent
possible injury to personnel.
(6)
Attach lifting device to steering gear (4).
(7)
With the aid of an assistant, remove four
screws (18) and (19), locknuts (20), steering
gear (4) and bracket (21) from frame (22).
Discard locknuts.
|
