|
| |
TM 9-2320-364-34-2
3-58
3-6. ENGINE LIFTING BRACKETS REPLACEMENT (CONT).
NOTE
There is one lifting bracket located on each cylinder head. Both lifting brackets are
removed the same way except where noted.
(2)
Remove four screws (7), lockwashers (8) and washers (9) from cylinder head support bracket (10).
Discard lockwashers.
(3)
Remove two screws (11), lockwashers (12) and cylinder head support brackets (10) from cylinder head
(13). Discard lockwashers.
NOTE
Perform Step (4) for right side lifting bracket.
(4)
Remove screw (14), lockwasher (15) and clip (16) and engine lifting bracket (17) and gasket (20) from
cylinder head (13). Discard lockwasher and gasket.
NOTE
Perform Step (5) for left side lifting bracket.
(5)
Remove screw (14), clip (16), screw (18), oil filler bracket (19), engine lifting bracket (17) and gasket
(20) from cylinder head (13). Discard gasket.
|
