|
| |
TM 9-2320-364-34-2
3-71
NOTE
All 24 cam followers are
installed the same way.
Install parts in location as
noted prior to removal.
(17)
Apply lubricating oil to lower spring
seat (37), spring (36), nut (35) and push
rod (38).
(18)
Install lower spring seat (37), spring (36) and
nut (35) on push rod (38).
Use extreme care when installing
spring retainers. Spring retainers
are under spring tension and can
act as projectiles when released
suddenly. Ensure proper eye
protection is worn to prevent
injury to personnel.
NOTE
Install spring retainers as noted
prior to removal.
(19)
Position cylinder head (3) on side on
wooden blocks and install upper spring seat
(40) and spring retainer (39) in top side of
cam follower bore of cylinder head (3).
(20)
Install push rod assembly (34) in cylinder
head (3).
NOTE
Cam follower should be
positioned so oil hole points
away from exhaust valves.
(21)
Install cam follower (33) over push rod
assembly (34) and install in cylinder
head (3).
(22)
Install cam follower guide (32), two
lockwashers (31) and screws (30) in cylinder
head (3).
|
