|
| |
TM 9-2320-364-34-2
3-105
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(4)
Apply International Compound No. 2 to threads of 12 lockscrews (1).
NOTE
Six welded plates on inner most disk face toward engine.
Remove cable ties after flex coupling inserts are aligned.
(5)
Align screw holes in disk assembly (5), flex coupling inserts (4) and flywheel plate (2) with hub body (8).
(6)
With the aid of an assistant, install disk assembly (5), four flex coupling inserts (4) and flywheel plate (2)
with 12 lockscrews (1). In sequence shown tighten screws to 100 lb-ft (136 N.m).
c.
Follow-On Maintenance:
Assemble engine/transmission, (Para 3-5).
END OF TASK
|
