|
| |
TM 9-2320-364-34-2
3-111
Materials/Parts
Gasket (2) (Item 115, Appendix E)
Gasket (4) (Item 116, Appendix E)
Screw (12) (Item 533, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Spare tire removed, (TM 9-2320-364-10)
Left side noise panel removed,
(TM 9-2320-364-20)
Left front noise panel removed,
(TM 9-2320-364-20)
Right side noise panel removed,
(TM 9-2320-364-20)
Air pressure transducer removed,
(TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
3-15. AIR BOX COVER AND GASKET REPLACEMENT.
NOTE
Right and left air box covers and gaskets are removed the same way. Right side shown.
(1)
Remove four screws (1), two air box covers (2) and gaskets (3) from engine block (4). Discard screws and
gaskets.
NOTE
Clamp is located on right side only.
(2)
Remove two screws (5), clamp (6), air box cover (7) and gasket (8) from engine block (4). Discard screws
and gasket.
(3)
Repeat Steps (1) and (2) for left side air box covers and gaskets.
|
