|
| |
TM 9-2320-364-34-2
3-112
3-15. REAR OIL SEAL/SLEEVE REPLACEMENT. (CONT).
b.
Installation.
NOTE
Clamp is on right side only.
(1)
Install gasket (8), air box cover (7) and clamp (6) on engine block (4) with two screws (5). Tighten screw to
96 to 144 lb-in (11 to 16 N.m).
NOTE
Right and left air box covers and gaskets are installed the same way. Right side shown.
(2)
Install two gaskets (3) and air box covers (2) on engine block (4) with four screws (1). Tighten screws to 96
to 144 lb-in (11 to 16 N.m).
(3)
Repeat Steps (1) and (2) for left side air box covers and gaskets.
c.
Follow-On Maintenance:
Install air pressure transducer, (TM 9-2320-364-20).
Install left front noise panel, (TM 9-2320-364-20).
Install left side noise panel, (TM 9-2320-364-20).
Install right side noise panel, (TM 9-2320-364-20).
Install spare tire, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
