|
| |
TM 9-2320-364-34-2
3-114
3-16. AIR BOX DRAIN REPLACEMENT. (CONT).
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Right and left air box drains are installed the same way. Right side shown.
Install elbow and adapter as noted prior to removal.
(1)
Apply sealing compound to threads of adapter (7).
(2)
Install adapter (7) in engine block (3).
NOTE
If plug was removed, performs Steps (3) and (4).
(3)
Apply sealing compound to threads of plug (8).
(4)
Install plug (8) in tee (6).
(5)
Install tee (6) on adapter (7).
(6)
Apply sealing compound to threads of tee (6).
(7)
Install check valve (5) on tee (6).
(8)
Install hose (4) on check valve (5).
(9)
Install clamp (2) on engine block (3) with screw (1).
(10)
Repeat Steps (1) through (9) to install left side air box drain.
c.
Follow-On Maintenance:
Install air pressure transducer, (TM 9-2320-364-20).
Install right front fender skirt, (TM 9-2320-364-20).
Install left front fender skirt, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
