|
| |
TM 9-2320-364-34-2
3-122
3-19. PUSH ROD AND CAM FOLLOWER REPLACEMENT (CONT).
(5)
Remove nut (7), spring (8) and lower spring
seat (9) from push rod (10).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
NOTE
Note position of retaining ring
prior to removal.
(6)
Remove retaining ring (11) from top side of
cylinder head (1).
(7)
Remove upper spring seat (12) from
cylinder head (1).
b.
Installation.
NOTE
Apply lubricating oil to all
parts before installation.
All 24 cam followers are
installed the same way.
Install parts in location as
noted prior to removal.
(1)
Install lower spring seat (9), spring (8) and
nut (7) on push rod (10).
|
