|
| |
TM 9-2320-364-34-2
3-121
Materials/Parts
Oil, Lubricating (Item 38, Appendix B)
Rags, Wiping (Item 47, Appendix B)
Tags, Identification (Item 72, Appendix B)
Lockwasher (2) (Item 290, Appendix E)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Rocker arms removed, (Para 3-18)
Cylinder head removed, (Para 3-7)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Gage Set, Feeler (Item 66, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Hammer, Hand, Soft Plastic
(Item 88, Appendix F)
Pliers, Retaining Ring (Item 154, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wooden Blocks (2) (Appendix C)
3-19. PUSH ROD AND CAM FOLLOWER REPLACEMENT.
a.
Removal.
NOTE
Note location and position
of all parts prior to removal.
All 24 cam followers are
removed the same way.
(1)
Position cylinder head (1) on side on
wooden blocks.
(2)
Remove two screws (2), lockwashers (3)
and cam follower guide (4) from cylinder
head (1). Discard lockwashers.
(3)
Remove cam follower (5) from cylinder
head (1).
(4)
Remove push rod assembly (6) from
cylinder head (1).
|
