|
| |
TM 9-2320-364-34-2
3-136
3-21. ENGINE OIL PAN AND GASKET REPLACEMENT (CONT).
(22)
Remove plug (39), elbow (40) and
reducer (41) from oil pan (24).
(23)
Raise front axle and remove jackstands from
front axle and lower front of truck to ground
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Apply sealing compound to threads of
plug (39), reducer (41) and elbow (40).
(2)
Install plug (39), reducer (41) and
elbow (40) in oil pan (24).
(3)
Apply sealing compound to threads of
adapter (36), reducer (38) and plug (37).
(4)
Install adapter (36), reducer (38) and
plug (37) in oil pan (24).
(5)
Install drain hose (35) on adapter (36) in oil
pan (24).
|
