|
| |
TM 9-2320-364-34-2
3-137
(6)
Apply grease to mating surface of oil
pan (24).
(7)
Position gasket (33) on oil pan (24).
(8)
Position jack under Axle No. 2 and raise
front of truck and position jackstands under
front axle.
(9)
With the aid of an assistant, position oil
pan (24) and gasket (33) on engine
block (34).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(10)
Apply sealing compound to threads of
screws (30) and (32).
NOTE
All screws must be installed
in original locations.
Screw lengths are given to
ensure screws are installed
in proper location in oil pan.
(11)
Center and position two (1 in. [25 mm])
screws (32) on each side of oil pan (24).
(12)
Position four (1.135 in. [28.829 mm])
screws (30) in support bracket (31).
(13)
Position 18 (1 in. [25 mm]) screws (32) in
each side of oil pan (24).
|
