|
| |
TM 9-2320-364-34-2
3-157
NOTE
Perform Steps (9), (11), (13) and
(14) if oil tube brackets do not
align with screw holes.
(9)
Loosen four nuts (12) and (13) on oil tube
brackets (4).
(10)
Install two lockwashers (3) and screws (2) in
oil tube brackets (4) and main bearing
cap (5).
(11)
Adjust oil tube brackets (4) to seat firmly
against main bearing cap (5).
(12)
Tighten two screws (2) on oil tube
brackets (4) to 26 to 29 lb-ft (35 to 39 N.m).
(13)
Tighten two nuts (12) on oil tube
brackets (4) to 26 to 29 lb-ft (35 to 39 N.m).
(14)
Tighten two nuts (13) on oil tube
brackets (4) to 120 to 156 lb-in (14 to 18 N.m).
f.
Follow-On Maintenance:
Install oil pressure relief valve, (Para 3-28).
Install oil pressure regulator valve, (Para 3-27).
Install oil pan, (Para 3-22).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
