|
| |
TM 9-2320-364-34-2
3-189
(5)
Remove locknut (27), screw (26),
bracket (22), dipstick tube (23) and cushion
clip (24) from bracket (25). Discard locknut.
NOTE
Dipstick tube brackets and dipstick
tubes are cable tied to engine for
shipping. Install cable ties as
required.
(6)
Install screw (26) and locknut (27) on
bracket (25).
(7)
Remove screw (17), cushion clip (21) and
hose (20) from engine bracket (18).
(8)
Remove screw (16) and bracket (19) from
engine bracket (18).
(9)
Install screw (16) on engine bracket (19).
Tighten screw to 23 to 26 lb-ft (31 to 35
N.m).
(10)
Install screw (17) on engine bracket (18).
Tighten screw to 41 to 47 lb-ft (56 to 64
N.m).
(11)
Install engine mounting brackets (7) on
engine assembly (12) with twelve
lockwashers (15) and screws (14). Tighten
screws to 112 to 120 lb-ft (152 to 163 N.m).
|
