| |
TM 9-2320-364-34-2
3-190
3-33. SHIPPING CONTAINER, ENGINE ASSEMBLY
REPLACEMENT (CONT).
Engine assembly weighs 2600 lbs
(1180 kg). Attach suitable lifting
device prior to installation to
prevent injury to personnel.
(12)
With the aid of an assistant, attach a lifting
device to engine assembly (12).
(13)
Install engine assembly (12) to lower
container (13).
(14)
Install mounting brackets (7) on inner
frame (5) with eight screws (4), washers (3)
and locknuts (2). Tighten locknuts to 58 to
66 lb-ft (79 to 89 N.m). Tighten 12 screws (6)
on mounting bracket (7) to 58 to 66 lb-ft
(79 to 89 N.m).
(15)
Install two engine mounts (11) to inner
frame (5) with two screws (10), washers (9)
and locknuts (8). Tighten locknuts to 122 to
130 lb-ft (165 to 176 N.m).
(16)
Remove lifting device from engine assembly (12).
Air compressor weighs 115 lbs
(52 kg). Attach suitable lifting
device prior to installation to
prevent injury to personnel.
(17)
Attach a lifting device to air compressor (1).
(18)
Install air compressor to inner frame (5)
with four screws (4), washers (3) and
locknuts (2). Tighten locknuts to 58 to 66
lb-ft (79 to 89 N.m).
(19)
Remove lifting device from air compressor (1).
|