|
| |
TM 9-2320-364-34-2
4-29
(5)
Remove two screws (9) and copper washers (10) from blower drive assembly (11). Discard copper washers.
(6)
Remove blower drive assembly (11) and gasket (12) from flywheel housing (13). Discard gasket.
b.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(1)
Apply sealing compound to two screws (9).
(2)
Install gasket (12) and blower drive
assembly (11) on flywheel housing (13) with
two copper washers (10) and screws (9).
Tighten screws to 25 to 30 lb-ft (34 to 41
N.m).
|
