|
| |
TM 9-2320-364-34-2
4-34
Materials/Parts
Grease (Item 24, Appendix B)
Oil, Lubricating (Item 38, Appendix B)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Cooling assembly removed,
(TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Gloves, Heavy Duty (Item 82, Appendix F)
Wrench, Crowsfoot 9/16 in., 3/8 in. Drive
(Item 269, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Lifting Device Minimum Capacity 100 lbs
(45 kg)
4-8. TURBOCHARGER REPLACEMENT.
Materials/Parts
Wire (Item 79, Appendix B)
Clamp (Item 27, Appendix E)
Clamp (Item 29, Appendix E)
Gasket (Item 77, Appendix E)
Gasket (Item 113, Appendix E)
Locknut (4) (Item 198, Appendix E)
Lockwasher (2) (Item 285, Appendix E)
Gloves must be worn when handling insulation blanket . Insulation blank is made of
fiberglass and may cause skin irritation. Failure to comply may result in injury to
personnel.
(1)
Cut two wires (1) on tabs (2) and remove insulation blanket (3) from turbocharger (4). Discard wires.
|
