|
| |
TM 9-2320-364-34-2
4-35
NOTE
Studs, nuts and washers may be
removed as one assembly.
(2)
Remove four studs (5), nuts (6) and
washers (7) from exhaust manifold
flange (8).
(3)
Remove and discard four locknuts (6) from
studs (5).
(4)
Remove and discard nut (9) on clamp (10).
(5)
Remove air inlet tube (11) from
turbocharger compressor housing (12).
(6)
Remove and discard clamp (10) from air
inlet tube (11).
(7)
Remove and discard nut (13) from clamp
(14).
(8)
Remove and discard clamp (14) from
exhaust tube (15).
(9)
Remove exhaust tube (15) from
turbocharger turbine housing (16).
(10)
Loosen fitting (17) and disconnect oil inlet
tube (18) from top of turbocharger center
housing (19).
Turbocharger weighs 57 lbs
(26 kg). Attach suitable lifting
device prior to removal to
prevent possible injury to
personnel.
(11)
Attach lifting device to turbocharger (4).
(12)
Loosen two clamps (20) and push rubber
sleeve (21) down on air inlet housing (22).
(13)
Remove two screws (23) and
lockwashers (24) from turbocharger center
housing (19). Discard lockwashers.
|
