|
| |
TM 9-2320-364-34-2
6-3
NOTE
Remove tape, if applied.
Capacitor may need to be
pried off to remove.
(2)
Remove two nuts (6), lockwashers (7) and
capacitor (8) from cover (9). Discard
lockwashers.
(3)
Remove four screws (10), cover (9), gasket
(11) and two electrical contact brushes (12)
from brush housing (13). Discard gasket.
(4)
Remove three nuts (14) from studs (15).
NOTE
Tag and mark all wires prior to
removal.
(5)
Remove three wires (16) from studs (15).
(6)
Remove screw (17), lockwasher (18) and
clip (19) from slip ring end housing (20) and
remove clip from wires (16). Discard
lockwasher.
(7)
Remove two screws (21), lockwashers (22),
screws (23), lockwashers (24), capacitor (25)
and spacers (26) from slip ring end
housing (20). Discard lockwashers.
|
