|
| |
TM 9-2320-364-34-2
6-63
NOTE
Tag and mark all connectors before removal.
(2)
Remove connectors (6), (7) and (8) from overload control box (9).
(3)
Remove screw (10), lockwasher (11),
washer (12) and ground strap (13) from
boom (14). Discard lockwasher.
(4)
Remove three screws (10), washers (11),
overload control box (9) and four spring clip
nuts (15) from boom (14). Discard spring
clip nuts.
b.
Installation.
(1)
Install four spring clip nuts (15), and
overload control box (9) on boom (14) with
three washers (12) and screws (10).
(2)
Install ground strap (13) on boom (14) and
overload control box (9) with washer (12),
lockwasher (11) and screw (10).
|
