|
| |
TM 9-2320-364-34-2
6-71
NOTE
Tag and mark connectors before removal.
(2)
Disconnect two connectors (6) from Synchronous Reference Sensor and Timing Reference Sensor
(SRS/TRS) (7).
(3)
Remove two screws (8) and bracket (9) from front end plate (10).
(4)
Remove screw (11) and retaining clip (12) from bracket (9).
(5)
Remove SRS/TRS (7) from bracket (9).
b.
Installation.
(1)
Install SRS/TRS (7) in bracket (9).
(2)
Position retaining clip (12) on SRS/TRS (7)
and bracket (9).
(3)
Position screw (11) in retaining clip (12) and
bracket (9).
|
