|
| |
TM 9-2320-364-34-2
6-72
6-10. DDEC II TIMING AND SYNCHRONOUS REFERENCE SENSOR
(TRS/SRS) REPLACEMENT/ADJUSTMENT(CONT).
(4)
Position bracket (9) on front end plate (10)
with two screws (8).
(5)
Connect two connectors (6) to SRS/TRS (7).
c.
Adjustment.
Ensure spacer is installed
between dial indicator and top of
holder. Failure to comply may
result in damage to dial indicator
if piston is already at top of
travel when dial indicator is
installed.
(1)
Install slotted spacer between dial indicator
and top of holder. Tighten thumbscrew.
|
