|
| |
TM 9-2320-364-34-2
6-141
NOTE
Tag and mark all wires and connectors prior to removal.
Remove cable ties required.
Steps (1) through (46) are located in dash area.
(1)
Remove two screws (1), locknut (2) and headlight guard (3) from cab (4). Discard locknut.
(2)
Remove two locknuts (5) and screws (6) from switch harness MC4 connector (7) and bracket (8). Discard
locknuts.
(3)
Remove switch harness MC4 connector (7) from bracket (8).
(4)
Remove two locknuts (9) and screws (10) from gage harness MC8 connector (11) and bracket (8). Discard
locknuts.
(5)
Remove gage harness MC8 connector (11) from bracket (8).
|
