|
| |
TM 9-2320-364-34-2
6-284
6-29. CHASSIS WIRE HARNESS REPLACEMENT (CONT).
NOTE
Perform steps (82) through
(87) for trucks equipped
with a 200 amp alternator.
Perform steps (88) through
(91) for trucks equipped
with a 145 amp alternator.
(82)
Remove nut (50) from 24 volt load terminal
(53) of polarity protection control (54).
(83)
Install wire 1431 (52), lockwasher (51) and
nut (50) on 24 volt load terminal (53).
(84)
Remove nut (46), wire 1435 (47) and screw
(49).
(85)
Install screw (49), wire 1435 (47) and wire
1435 (48) of chassis wire harness (15) and
nut (46).
(86)
Install wire 1020 (45), lockwasher (34) and
screw (33) on circuit breaker (31).
Adhesives, solvents, and sealing
compounds can burn easily can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(87)
Apply electrical sealant to screw (33),
screw (49) and 24 volt load terminal (53).
49
15
46
52
50
51
47
48
53
54
45
34
33
31
|
