|
| |
TM 9-2320-364-34-2
6-304
6-30. CRANE WIRING REPLACEMENT (CONT).
(d)
Remove solenoid harness (1) from
crane (14) and truck (15).
(2)
Installation.
NOTE
Install cable ties as
required.
(a)
Position solenoid harness (1) on
truck (15) and crane (14).
NOTE
Wires to all control valves
are installed the same
way.
(b)
Install square seal (12) and
connector (11) on control valve (13)
with screw (10).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(c)
Apply sealing compound to four
screws (7).
(d)
Install cover (8) on bracket (9) with
four screws (7), washer (6), washer
(5), lockwasher (4) and nut (3).
|
