|
| |
TM 9-2320-364-34-2
6-313
(11)
Disconnect proximity switch (hook arm down) connector (20) from MC88 connector (21).
(12)
Remove MC86 connector (22) from bulkhead connector (23).
(13)
Loosen two screws (24) and remove nut (25) from bulkhead connector (23).
(14)
Remove four locknuts (26) and screws (27) from bulkhead connector (23) and compression
frame (19). Discard locknuts.
(15)
Lift bulkhead connector (23) up through slot in compression frame (19) and remove LHS main wire
harness (11) from truck.
b.
Installation.
(1)
Install bulkhead connector (23) in compression frame (19) with four screws (27) and locknuts (26).
(2)
Install nut (25) on bulkhead connector (23) and tighten two screws (24).
(3)
Install connector (22) on bulkhead connector (23).
|
