|
| |
TM 9-2320-364-34-2
6-324
6-33. LHS CAB-TO-BULKHEAD WIRE HARNESS REPLACEMENT. (CONT).
(3)
Remove locknut (4), screw (5) and cushion
clip (6) from bracket (7). Discard locknut.
(4)
Remove cab to bulkhead wire harness (10)
from cushion clip (6).
(5)
Disconnect MC84 connector (8) from cab
bulkhead connector (9).
(6)
Remove cab to bulkhead wire harness (10)
from truck (11).
b.
Installation.
NOTE
Evenly distribute any slack
in harness.
Install cable ties as required.
(1)
Position cab to bulkhead wire harness (10)
through truck (11).
(2)
Connect MC84 connector (8) to cab
bulkhead connector (9).
(3)
Position cab to bulkhead wire harness (10)
in cushion clip (6).
(4)
Install cushion clip (6), screw (5) and
locknut (4) on bracket (7).
(6)
Close front access cover (1).
c.
Follow-On Maintenance:
Connect batteries, (TM 9-2320-364-20).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
