|
| |
TM 9-2320-364-34-2
6-383
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
6-38. POLARITY WIRE HARNESS REPLACEMENT (200 AMP).
Materials/Parts - Continued
Lockwasher (Item 249, Appendix E)
Lockwasher (9) (Item 251, Appendix E)
Lockwasher (2) (Item 271, Appendix E)
Lockwasher (2) (Item 281, Appendix E)
Lockwasher (4) (Item 282, Appendix E)
Lockwasher (6) (Item 283, Appendix E)
Lockwasher (3) (Item 286, Appendix E)
Lockwasher (2) (Item 299, Appendix E)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
Batteries disconnected, (TM 9-2320-364-20)
Cab engine access panel removed,
(TM 9-2320-364-20)
Left side noise panel removed,
(TM 9-2320-364-20)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Wrench, Torque, (0 to 60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m)
(Item 277, Appendix F)
Materials/Parts
Cable Ties (Item 9, Appendix B)
Compound, Corrosion Preventive
(Item 15, Appendix B)
Rags, Wiping (Item 47, Appendix B)
Sealant, Electrical (Item 50, Appendix B)
Tags, Identification (Item 72, Appendix B)
Locknut (2) (Item 174, Appendix E)
Locknut (Item 176, Appendix E)
Locknut (Item 209, Appendix E)
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber
gloves, and do not smoke when performing maintenance on batteries. Injury will result if
acid contacts skin or eyes. Wear rubber apron to prevent clothing being damaged.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may result. Damage to equipment, injury or death
to personnel may occur.
|
