|
| |
TM 9-2320-364-34-2
6-387
NOTE
There are two wires located on
starter solenoid terminal.
Remove only wire 1045 and
position remaining wire back on
terminal.
(9)
Remove nut (48), lockwasher (49), wire
1045 (50) from terminal (51) of starter
solenoid (47). Discard lockwasher.
(10)
Position nut (48) on terminal (50).
(11)
Remove two screws (52), wire 1020A (53)
and 1020B (54) from oil pressure switch
(55).
53
52
54
55
52
|
