|
| |
TM 9-2320-364-34-2
6-388
6-38. POLARITY WIRE HARNESS REPLACEMENT (200 AMP) (CONT).
(12)
Remove screw (56), lockwasher (57), wire
1815 (58), wire 1435 (59) and wire 1275
(60) from alternator (61). Discard
lockwasher.
(13)
Position wire 1815 (58) and screw (56) on
alternator (61).
NOTE
There are two wires located
on 24 volt terminal.
Remove only wire 1281A
and position remaining wire
back on 24 volt terminal.
Perform Steps (14) through
(17) only if truck is not
equipped with battery
disconnect switch.
(14)
Remove nut (62), lockwasher (63), washer
(64), washer(s) (65), if present, fuse link
(66) with insulator washer (67), wire
1281A (68) from 24 volt terminal (69).
Discard lockwasher.
(15)
Position fuse link (66) with insulator
washer (67), washer(s) (65), if removed,
washer (64) and nut (62) on 24 volt
terminal (69).
NOTE
There are two wires on 12 volt
terminal. Remove only wire
1274 and position remaining wire
back on 12 volt terminal.
(16)
Remove nut (70), lockwasher (71) washer
(72) and wire 1274 (73) from 12 volt
terminal (74). Discard lockwasher.
(17)
Position nut (70) and washer (72) on 12
volt terminal (74).
DOOR
SHOWN
REMOVED
FOR CLARITY
61
57
56
58
59
60
62
63
64
67
65
66
73
72
71
70
74
69
68
|
