|
| |
TM 9-2320-364-34-2
6-395
(11) Install wire 1020A (128), wire 1020 (127),
lockwasher (126), and screw (125) on
circuit breaker (123).
(12) Install circuit breaker (123) on bracket (124)
with two screws (121) and locknuts (122).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(13) Apply electrical sealant to screw (125).
(14) Remove nut (114) from 12 volt load
terminal (120) of polarity protection control
(113).
(15) Install wire 1079 (119), wire 1075 (118),
wire 1866 (117), wire 1430 (116),
lockwasher (115) and nut (114) on 12 volt
load terminal (120).
115
114
116
117
120
113
118
119
127
128
123
121
124
122
125
126
|
