|
| |
TM 9-2320-364-34-2
6-400
6-38. POLARITY WIRE HARNESS REPLACEMENT (200 AMP) (CONT).
(36)
Remove screw (56) and wire 1815 (58)
from alternator (61). Install wire 1275
(60), wire 1435 (59), wire 1815,
lockwasher (57) and screw on alternator.
(37)
Tighten screw (56) to 17 lb-ft (23 Nm).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(38)
Apply electrical sealant to screw (56), 24
volt terminal (69), 12 volt terminal (74),
and terminal (78).
(39)
Install wire 1020B (54), wire 1020A (53)
and two screws (52) on oil pressure switch
(55).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(40)
Apply electrical sealant to two screws (52).
53
52
54
55
52
61
57
56
58
59
60
78
74
69
|
