|
| |
TM 9-2320-364-34-2
6-399
NOTE
Perform Steps (30) through (35)
only if truck is not equipped with
battery disconnect switch.
(30)
Remove nut (70) and washer (72) from 12
volt terminal (74).
(31)
Install wire 1274 (73), washer (72),
lockwasher (71) and nut (70) on 12 volt
terminal (74).
(32)
Tighten nut (70) to 15 lb-ft (20 Nm).
(33)
Remove nut (62), washer (64), washer(s)
(if present) (65), and fuse link (66) with
insulator washer (67) from 24 volt terminal
(69).
(34)
Install wire 1281A (68), fuse link (66) with
insulator washer (67), washer(s) (if
removed) (65), washer (64), lockwasher
(63) and nut (62) on 24 volt terminal (69).
(35)
Tighten nut (57) to 15 lb-ft (20 Nm).
62
63
64
67
65
66
73
72
71
70
74
69
68
|
