|
| |
TM 9-2320-364-34-2
6-427
Upon installation of all wires and cables, ensure no contact is made with battery terminals
or other wires and cables. Strap wires and cables away from battery terminals and other
wires and cables as required to prevent damage to parts, personal injury, or death.
Battery acid (electrolyte) is extremely harmful. Always wear safety goggles and rubber
gloves, and do not smoke when performing maintenance on batteries. Injury will result if
acid contacts skin or eyes. Wear rubber apron to prevent clothing being damaged.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may result. Damage to equipment, injury or death
to personnel may occur.
Do not over-torque terminal connectors. Damage to terminals can result.
(43)
Install two terminals (2) on positive posts (13) and (14) on batteries one (9) and two (10) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(44)
Install two terminals (2) on positive posts (11) and (12) on batteries three (5) and four (6) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(45)
Install two terminals (2) on negative posts (7) and (8) on batteries one (9) and two (10) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m).
(46)
Install two terminals (2) on negative post (3) and (4) on batteries three (5) and four (6) and tighten two
nuts (1) 84 to 96 lb-in (9 to 11 N.m ).
|
