|
| |
TM 9-2320-364-34-2
6-432
6-40. POLARITY PROTECTION AND ALTERNATOR WIRE HARNESS REPLACEMENT
(200 AMP WITH BATTERY DISCONNECT SWITCH) (CONT).
NOTE
There are three wires located on
24 volt terminal. Remove only
wire 1281A and position
remaining wires back on 24 volt
terminal.
(11)
Remove nut (30), lockwasher (31), washer
(32), washer(s) (33), if present, fuse link
(34) with insulator washer (35), wire
1281A (36) from 24 volt terminal (37).
Discard lockwasher.
(12)
Position fuse link (34) with insulator
washer (35), washer(s) (33), if removed,
washer (32) and nut (30) on 24 volt
terminal (37).
NOTE
There are two wires on 12 volt
terminal. Remove only wire
1274 and position remaining wire
back on 12 volt terminal.
(13)
Remove nut (38), lockwasher (39) washer
(40) and wire 1274 (41) from 12 volt
terminal (42). Discard lockwasher.
(14)
Position nut (38) and washer (40) on 12
volt terminal (42).
(15)
Remove polarity protection and alternator
wire harness (43) from truck.
30
31
32
35
33
34
41
40
39
38
42
37
36
43
|
