|
| |
TM 9-2320-364-34-2
6-433
b.
Installation.
NOTE
Install cable ties as required.
(1)
Position polarity protection and alternator
wire harness (43) in truck.
(2)
Remove nut (38) and washer (40) from 12
volt terminal (42).
(3)
Install wire 1274 (41), washer (40),
lockwasher (39) and nut (38) on 12 volt
terminal (42).
(4)
Tighten nut (38) to 15 lb-ft (20 Nm).
(5)
Remove nut (30), washer (32), washer(s) (if
present) (33), and fuse link (34) with
insulator washer (35) from 24 volt terminal
(37).
(6)
Install wire 1281A (36), fuse link (34) with
insulator washer (35), washer(s) (if
removed) (33), washer (32), lockwasher
(31) and nut (30) on 24 volt terminal (37).
(7)
Tighten nut (30) to 15 lb-ft (20 Nm).
30
31
32
35
33
34
41
40
39
38
42
37
36
43
|
