|
| |
TM 9-2320-364-34-2
8-7
(7)
While assistant holds two screws (19),
position left support assembly (24) to two
brackets (25) with mounts (23), washers (22)
four washers (21) and two locknuts (20).
(8)
With the aid of an assistant, tighten
locknuts (27) and (20) on screws (26)
and (19) to 170 lb-ft (231 N.m).
(9)
Tighten nine screws (33) and three
screws (34) to 187 lb-ft (254 N.m).
(10)
Remove lifting device, chains, two 1/2-13
by 2 in. screws and 1/2 in. washers from
transfer case (17) and front shaft
assembly (18).
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid
injury or death, keep away from
open fire and use in a
well-ventilated area. If adhesive,
solvent, or sealing compound gets
on skin or clothing, wash
immediately with soap and water.
(11)
Coat threads of two screws (16) with sealing
compound.
(12)
Install two screws (16) in transfer case (17)
|
